39
Connecting the gas supply (continued)
● Possible connections
GAS SUPPLY FROM A CYLINDER
OR TANK (BUTANE/PROPANE
GAS).
For the user's safety, you must only
choose one of the following 3 connec-
tions:
- Connection with a rigid pipe made
from copper with screw on mechanical
connectors (G1/2 gas standard mark).
Make the connection directly at the end
of the elbow fitted on the appliance.
- Connection with a wavy metal
(stainless steel) hose with screw on
mechanical connectors whose lifetime
is unlimited (fig. A).
- Connection with a reinforced rub-
ber hose with screw on mechanical
connectors whose lifetime is 10 years
(fig. B).
In an existing system, a soft pipe fitted
with clamps whose lifetime is 5 years
may be used. It is necessary in this
case to use a adaptor without forgetting
to fit a sealing washer between the
adaptor and the hob's elbow (fig. C).
Screw on the adaptor with a torque not
exceeding 25 N.m.
The adaptor and sealing washer are
available from your After Sales Service
team.
BUTANE/PROPANE
Compulsory pressure regulator
propane
butanene butanene
All soft pipes and hoses whose lifetime is limited must have a maximum length of 2
metres and be accessible along their entire length. They must be replaced before the
end of their lifetime (marked on the pipe). Whatever the means of connection chosen,
check that the connection is leaktight, after installation, with soapy water.
Sealing washer
(not included)
Adaptor
(not included)
Clamp
(not included)
fig. A
Wavy metal hose
with mechanical
connectors
Hose
connection
Connection
through hose
with mechanical
connectors
fig. B
fig. C
Installing your hob in all simplicity
Comentarios a estos manuales